InWin 303 Nvidia Edition ATX Mid Tower Glass Case

Timelessly elegant design with huge hard-glass side window

The IN WIN 303 in the limited NVIDIA Edition combines modern optics with a elegant aesthetic. It is mainly made of high-quality, 1.2 mm thick steel and impresses especially through its huge side window made of tinted hard glass with "NVIDIA GeForce GTX" -letter. Innovative as IN WIN, the 3 mm thick side window can be opened completely without tools by a kind of handle on the upper edge. Clear advantage! The clear front of the black housing is interrupted only by the stylish I / O panel (2x USB 3.0, 2x USB 2.0, power button, HD audio), the "IN WIN" logo and the NVIDIA logo. A special feature of the NVIDIA edition is, of course, the green illumination of the logo and the individual ports, which again benefits the look and looks especially cool in the dark. 

Of course the black interior also holds some surprises. For example, the power supply is installed at the upper end of the housing and is located behind an air-permeable cover in honeycomb optics. As a result, the mainboard is mounted underneath it and allows a trouble-free presentation of the installed hardware. A practical support for graphics cards is also part of the scope of delivery, because highly-developed pixel accelerators can nowadays often bring a lot of weight on the scales. In general, the interior offers space for E-ATX, ATX, Micro ATX and mini ITX motherboards, CPU coolers up to 160 mm height, graphics cards up to 350 mm length and power supplies up to 200 mm length.

Cooling and hard disk space

The cooling concept in the IN WIN 303 is anything but standard. The theory provides that "cool" air is sucked in from the lower, dust-filter-protected side and blown out again at the top or at the rear. A maximum of three 120 mm fans are provided on the floor. The back can accommodate a 120-speed fan or a 120-radiator. The special feature of the cooling concept is the cover of the power supply unit, because a maximum of three 120 mm fans or a radiator of up to 360 mm in vertical alignment can be mounted on the honeycomb structure. The warm air should therefore be carried past the power supply unit through the side wall of the housing (also with honeycomb structure) to the outside. The vertical orientation of the upper cooling components looks really fantastic through the large side window, however, the fan or radiator must not be more than 70 mm high. In order to allow the user complete freedom in the choice of its housing cooling, no fans are included. 

IN WIN has of course also provided for sufficient disk slots. On the front of the motherboard tray are two brackets for two 2.5-inch hard drives, which can optionally be supplemented by a third bracket. In addition, there are two additional holders for 3.5-inch hard disks on the back of the motherboard tray. A lack of hard disk soldering is with the IN WIN 303 so ever. 

Technical details:

• Dimensions: 215 x 500 x 480 mm (W x H x D)
• Weight: approx. 10.88 kg
• Material: steel (chassis), tempered glass (window)
• Color: Black / Green
• Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX
• Fan (optional): 
  3x 120 mm (cover, vertical) 
  3x 120 mm (bottom) 
  1x 120 mm (rear)
• Radiator mountings (instead of the fans): 
  1x max. 360 mm (cover, vertical) 
  1x max. 120 mm (rear side)
• Filter: Ground (removable)
• Drive shafts: 
  2x 3.5-inch slots 
  2x 2.5-inch slots (3x possible)
• Power supply: 1x standard ATX12V (optional)
• Expansion slots: 7
• I / O panel: 
  2x USB 3.0 
  2x USB 2.0 
  1x HD audio (In / Out)
• Maximum graphics card length: 350 mm
• Maximum CPU cooler height: 160 mm
• Maximum power supply length: 200 mm