DC-to-DC
Technology
120mm
HDB Fan
Silent
Mode
80
PLUS Bronze Efficiency
POWER UP
The MWE Bronze offers a simple, reliable way to power your
mid-range system safely and efficiently. The 80 PLUS Bronze efficiency rating,
DC-to-DC circuit design, discrete cables, silent mode, and 120mm HDB fan offer
a power supply unit that's solid in features and performance while remaining
simple. This PSU will handle all your core computing needs with none of the
hassles or challenges of additional specialty features, software
synchronization, or other bells and whistles. Just plug the cables you need into
your components and get to work. For a great computing experience, you can’t go
wrong with the MWE Bronze.
80 PLUS BRONZE EFFICIENCY
The efficiency of your power supply unit is important
because it directly affects you system’s performance and your power bill. The
efficiency rating does not reflect the quality or reliability of a PSU. It only
reflects the unit’s ability to move power from the wall to your components. The
higher a PSU’s efficiency is, the lower the total amount of power it needs to
power your system. The MWE Bronze series has an 80 PLUS Bronze efficiency
rating, meaning it has a guaranteed typical efficiency of 85%.
Cooler Master now reports Cybenetics noise and efficiency
ratings for current power supply units where applicable. For more information
about the Cybenetics rating system and their work with Cooler Master .
DC-TO-DC CIRCUIT DESIGN
Power comes in multiple voltage levels. The wall delivers
power in one voltage level but your components each need a specific voltage to
operate properly. The process of converting raw power from the wall to the
multiple voltage levels your parts need requires special components to complete
this process quickly, efficiently, and safely. The MWE Bronze’s DC-to-DC + LLC
technology was painstakingly crafted to accomplish this goal. The Dual Forward
circuit layout has been designed to convert 12V power to 3V and 5V levels with
minimal ripple noise, 80 PLUS Bronze efficiency, and reduced risk to your
connected hardware.
ACTIVE POWER FACTOR CORRECTION
The many processes required by a power supply unit in order
to take power directly from the wall or other fixed power source, convert it to
the correct output required by the connected components, and then distribute
that power to said components safely can be full of risks. This is why it’s
important for a PSU to have the right protections and regulations to ensure
this process runs correctly.
The MWE Bronze’s Active Power Factor Correction uses a
specialized circuit to correct power factor, leading to reduced total
harmonics, corrected AC input voltage, and increased overall efficiency output.
120MM HDB FAN
The constant struggle between cooling and noise is as old as
the consumer PC industry itself. Keeping your components cool without having to
hear about it while you work is still one of the greatest challenges for all
fan based cooling technologies. The MWE Bronze tackles this problem with a
120mm HDB fan. The hydro dynamic fan bearing creates less friction, making it
great for low RPM operations. This technology keeps the fan running smoothly
and efficiently for longer, keeping the noise level down and extending the
lifespan of the PSU.
SILENT MODE
The MWE Bronze platform has a built in silent mode for low
wattage operation. While your system is in standby mode or running at loads
lower than 50W, the fan will not spin. This ensures complete silence during
casual operation. Once your system passes the 50W load threshold, the 120mm HDB
fan will activate automatically and cool the unit appropriately based on system
use and needs.
FLAT, BLACK CABLES
For many PC Builders with aesthetics in mind, cabling can be
on of the most troublesome parts of assembling a PC. Cables can be confusing,
too short or too long, and they almost never look good. The MWE Bronze uses
flat and flexible black cables to help deal with these problems. These cables
are more discrete and flexible, making them easier to implement into your
system while taking up less space. This is especially useful for smaller cases
and preserving airflow.
PSU CALCULATOR
Need help choosing the right power supply for your system?
Try out our easy to use, comprehensive PSU calculator.
MODEL
: MPE-7501-ACAAB
ATX
VERSION : ATX 12V V2.52
PFC
: Active PFC
INPUT
VOLTAGE : 100-240V
INPUT
CURRENT : 10-6A
INPUT
FREQUENCY : 50-60Hz
DIMENSIONS
(L X W X H) : 140 x 150 x 86 mm
FAN
SIZE : 120mm
FAN
BEARING : HDB
FAN
SPEED : 2400 RPM
NOISE
LEVEL @ 20% : 12.16 dBA
NOISE
LEVEL @ 50% : 17.9 dBA
NOISE
LEVEL @ 100% : 39.8 dBA
EFFICIENCY
: 85% Typically
80
PLUS RATING : 80 PLUS Bronze
ERP
2014 LOT 3 : Yes
OPERATING
TEMPERATURE : 40°C
POWER
GOOD SIGNAL : 100-500ms
HOLD
UP TIME : >18ms at 100% Full Load@230Vac
MTBF
: >100,000 Hours
PROTECTIONS
: OVP, OPP, SCP, UVP, OTP
REGULATORY
: CCC, CE, TUV-RH, RCM, EAC, cTUVus, FCC, BSMI, KC, CB
ATX
24-PIN CONNECTORS : 1
EPS
4+4 PIN CONNECTORS : 1
EPS
8 PIN CONNECTOR : 1
SATA
CONNECTORS : 8
PERIPHERAL
4-PIN CONNECTORS : 4
PCI-E
6+2 PIN CONNECTORS : 4
80
PLUS : Bronze
MODULAR
: Non Modular
WATTAGE
: 500 to 750W
All Rights Reserved © 2024 Quadrastores | Dar Technical General Trading Company | Developed By MicroSolutions